How to buff out light scratches
Recommended kit: Complete correction kit
A light scratch sits only in the clear coat and can usually be polished out. A deep scratch goes into the color or primer and cannot. The fingernail test tells you which one you have.

What you are looking at
Car paint is built in layers: primer, color (base coat), then clear coat on top. Polishing works by removing a very thin amount of clear coat until the bottom of the scratch is level with the surface around it. If the scratch reaches the color layer, there is no clear coat left beneath it to level, so polishing cannot remove it.
Check it in two minutes
- Clean the area. Many "scratches" are paint transfer or residue sitting on top. If yours rubs away, see paint transfer and scuffs.
- Do the fingernail test. Drag a fingernail gently across the scratch. If it does not catch, it is likely in the clear coat and fixable. If it catches, it is likely too deep to polish out completely.
- Wet it. Spray a little water on the scratch. If it nearly disappears while wet, it is shallow. If you can see a different color (white primer or grey metal) in the bottom, it needs touch-up paint.
Can you fix it yourself?
For one or two short scratches, a scratch remover by hand may be enough. For many scratches, or longer ones, a DA polisher with a compound is faster and gives a more even finish. For deep scratches you can still polish the edges so they catch less light, but the line will usually stay visible.
How to fix it
- Tape around the scratch so you can see the area you are working on and protect nearby trim.
- Try by hand first on a single scratch with a scratch remover and an applicator pad, using firm, straight overlapping strokes along the scratch.
- Switch to the machine if it does not move: compound on a cutting pad, then polish on a finishing pad to restore gloss.
- Check and stop. Re-check with your fingernail and light. If it is not improving after a few sets, stop; repeated passes remove clear coat you cannot put back.
- Protect the area with wax or sealant.
Complete correction kit: A mid-range dual-action polisher, dedicated cutting and polishing pads, a pro compound and finishing polish, plus prep, light, towels and protection.
What is in the Complete correction kit
- MachineCheck price on Amazon
Griot's Garage G9 random orbital polisher
A well-known mid-range DA polisher. Its listing describes a 1000-watt motor, a 9mm orbit and a 6-inch backing plate.
From the Amazon listing: 1000-watt motor; 9mm orbit; 6-inch vented backing plate; 6 speed settings.
- Cutting padsCheck price on Amazon
Griot's Garage BOSS 6.5-inch fast correcting foam pads (set of 2)
Firm cutting pads for the compound step on moderate to heavy defects. 6.5-inch pads to suit the 6-inch backing plate.
From the Amazon listing: firm foam for moderate to severe defects; set of 2, 6.5-inch.
- Polishing padsCheck price on Amazon
Lake Country 6.5-inch HDO foam polishing pad kit (3-pack)
Three softer pads for polishing and finishing after you compound, from heavy polishing down to an ultrasoft finishing pad.
From the Amazon listing: one blue heavy polishing, one orange light polishing and one ultrasoft black finishing pad; title says it fits a 6-inch backing plate.
- CompoundCheck price on Amazon
Meguiar's Professional M110 Ultra Pro Speed Compound (32 oz)
The compound for the cutting step on swirls, oxidation and light scratches.
- Finishing polishCheck price on Amazon
Meguiar's Professional M205 Ultra Finishing Polish (8 oz)
A finishing polish to remove the haze the compound leaves and bring back gloss.
From the Amazon listing: removes swirls and light defects; by hand, DA polisher or rotary.
- PrepCheck price on Amazon
Meguiar's Smooth Surface Clay Kit
Decontaminate the paint before polishing.
From the Amazon listing: three 60 gram clay bars; 16 oz Quik Detailer as lubricant; microfiber towel.
- Masking tapeCheck price on Amazon
3M Automotive Performance Masking Tape (36 mm x 32 m)
Automotive masking tape to protect rubber, textured trim, badges and sharp edges while you polish.
From the Amazon listing: conforms to curves; removes without residue; for moldings, plastic, glass, rubber and paint.
- Panel wipeCheck price on Amazon
Griot's Garage Surface Prep Cleanser (22 oz)
A panel wipe that removes polishing oils so you see the true result before protecting.
From the Amazon listing: removes polishing oils, waxes and residues; for paint, plastic, rubber, glass and metal.
- Inspection lightCheck price on Amazon
Astro Pneumatic 50SL SunLight rechargeable color-match light
A handheld color-match light so you can see swirls and haze in a garage or in the shade.
From the Amazon listing: 400 lumen; rechargeable; CRI 97; magnetic base and hook.
- Pad careCheck price on Amazon
Chemical Guys foam and wool pad conditioning brush
Cleans and fluffs pads between sections so they keep cutting evenly.
From the Amazon listing: cleans and reconditions foam pads; also works on wool pads.
- TowelsCheck price on Amazon
The Rag Company Edgeless 365 microfiber towels (16x16 in, 10-pack)
Towels for residue wipe-off.
From the Amazon listing: edgeless, tagless 365gsm microfiber; for drying, wiping and removing product.
- ProtectionCheck price on Amazon
Meguiar's Hybrid Ceramic Wax (26 oz spray)
Protection for the corrected paint.
From the Amazon listing: SiO2 hybrid spray wax; spray on, rinse off.
By-hand option for small areas
- Scratch removerCheck price on Amazon
Meguiar's ScratchX (7 oz)
For one or two fine scratches that do not catch a fingernail. Work it in by hand with an applicator pad, then wipe and check. If the scratch does not improve, move to the machine method above.
From the Amazon listing: removes fine scratches, swirl marks and fingernail marks; clear coat safe.
When to call a professional
Scratches that catch a fingernail, show primer or metal, or sit on a sharp body line are better handled with touch-up paint or by a body shop.
Other kits that fit this problem
Other paint problems
Questions
Which scratches can be buffed out?
Scratches that sit only in the clear coat. If your fingernail does not catch on the scratch, it is likely in the clear coat and fixable.
What if the scratch shows white or grey at the bottom?
That is primer or metal showing, so the scratch is through the paint. It needs touch-up paint or a body shop, not polishing.
Should I use a machine or work by hand?
For one or two short scratches, try a scratch remover by hand first. For many or longer scratches, a DA polisher with compound, followed by polish, is faster and more even.